Do You Need Affordable Display Boards for Trade Shows?

Option 3 – 1900mm/W x 2320mm/H

Model Number: SK-MDS-1900C
Width1900mm
Height2320mm

Price Includes:

  • 1 set aluminium frame with hardware
  • 1 set fabric graphic
  • 1 hard shipping case with wheels

Optional:

  • 1 set canopy structure with gray fabric cover
  • 1 set plexiglass header graphic
  • 2 halogen lights

If you are organising an expo or trade show, it is very important that you pay attention to the trade show display board you are using. High-quality display boards for trade shows will give your event a touch of class and help your event grow in prestige. These display boards will also impress the event’s participants and make them do their best in decorating their booth. Our modular display systems will help you achieve this purpose.

Attractive, Well-Designed Displays

The satellite modular displays we offer are attractive in appearance and will make each exhibition booth in your venue look professional. How your displays look like is essential if you’re an organiser for a high-profile event like a wine or food expo. These 1900mm x 2320mm fabric display systems are photogenic and will look good in reporters’ videos and photographs. They are excellent even for five-star hotels and convention centres. Each set of this type has a fabric graphic and a frame. The fabric graphic is produced using the latest in dye sublimation printing technology that results in vivid colours and sharp images. The frame is made with aluminium. It has cross bars that lock in place to keep the display secure. In addition to the basic frame-and-fabric-graphic assembly, we also offer extra items such as counters, tablecloths and halogen lights to enhance the look of each exhibition booth.

Time-Saving and Reusable

Among the advantages of these 1900mm x 2320mm display boards for trade shows is it does not take a lot of time to set up. The different pieces making up the frame of each board lock together and are fastened with screws. The fabric graphic slips into its slide easily as well. The canopy structure already comes pre-assembled so all you need to do is to push each piece until they click in place. The fabric graphic that comes with the canopy zips closed. It will only take you around 30 minutes to assemble each of these boards. Perhaps the best benefit you will enjoy with these boards is you will be able to use them again and again. The frames are durable and won’t damage easily. The fabric graphics are fade-resistant as well. If you do need new images for your displays on your next trade show, you just have to order new fabric graphics to fit the frames. Additionally, you can mix and match this type of modular display with other types so you can be as creative as you want with your setup. These modular display systems will prove to be an investment for your company in the end. Indeed, our display boards for trade shows are the best option you will find. Call us right now to find out more about the benefits of using our display boards.

Details:

  • Setup Time: 30 Minutes
  • Graphic Material: Fabric
  • Can be single-sided or double-sided
  • Dimensions: 1900mm/W x 2320mm/H

Setup Instructions

1

Place the feet in the assembly area approximately six feet apart and slide the vertical pole sections onto the foot as shown.

2

Assemble top and bottom horizontal profiles. Slide two sections together as shown. Using the torx key, rotate clockwise 1/4 turn to lock in place and tighten the torx screw on the bottom of the profile.

3

With torx locks facing the back of display, slide the fabric into the curved side of the top and bottom profile.

4

Attach the horizontal profiles to the vertical poles using the torx key. Bottom profile should be flush with the bottom of the vertical poles. To eliminate the need of a ladder, temporarily attach the top profile at eye level as shown in step 5.

5

Open the yellow sandwichboards and place them parallel to vertical poles.

6

Tilt the display down so the vertical poles rest on the yellow sandwich boards.

7

Release the top profile and attach flush with the top of the vertical poles using the torx key. Beginning at one end, tuck the side of the fabric into the center slot of the vertical poles.

8

If used, attach the end cap profiles as shown using the torx key.

9

Slide the end cap fabric into the top and bottom profile as shown. Beginning at one end, tuck the side of the fabric into the center slot of the vertical pole. If you are using Plexigas end caps, see instructions supplied separately.

10

All sections are pre connected, just push together until parts click.

11

Life the roof assembly and slide the poles evenly and smoothly into the vertical poles. The fabric zipper should be facing down toward the back of the unit.

12

If used, you may now attach lights. Slide the “T” section into the slot. Tighten with the round thumb nut.

13

While standing in front of the unit, SLOWLY lift with the unit to the vertical position.

14

Confirm all the fabric edges are pushed neatly and evenly into the horizontal and vertical profiles.

15

Enjoy.

16

17

Coming soon

Coming soon

Contact Details

PO BOX 57 Crows Nest NSW 2065

(02) 9037 0353

info@skdisplaysbanners.com.au

We appreciate your interest in SK Displays. You can complete the inquiry form below to request more information or you can simply send us an e-mail to info@skdisplaysbanners.com.au or call us directly at (02) 9432 7840 to ask for assistance.

Request a QUOTE

* required fields

Subscribe