Brilliant Exhibition Ideas That Won't Cost You As Much

Model Number: SK-MDS-2900C1L1R-S

Width 2900mm
Height 2320mm

Price Includes:

  • 1 set aluminium frame with hardware
  • 1 set fabric graphic
  • 1 set canopy structure with gray fabric cover
  • 1 hard shipping case with wheels


  • 1 set plexiglass header graphic
  • 2 halogen lights

Option 7 – 2900mm/W x 2320mm/H

Are you organising an expo or trade show and you need exhibition ideas that will help you run your event smoothly and make it a success? Among the expo display ideas you have to consider is the kind of convention booths you will be using at the event. We have varieties of a modular exhibition board that will give your expo stands a smart and professional look without breaking your budget.

Smart, Versatile Displays

Our modular display systems are excellent choices for the exhibition booths you will set up at your convention. They are especially suited for high-profile events, such as food and wine expos, held in first-class convention centres and hotels. Their appearance is unique and eye-catching. The 2900mm x 2320mm modular display we offer here is consist of a frame, a canopy structure, a fascia, and a set of three fabric graphic panels. The frame and the canopy are made of aluminium, while the fascia is plexiglass. The three fabric graphic panels – the main panel and the two side panels – are made using the latest dye sublimation printing technology that yields bright colours and well-defined images. The canopy structure also has a gray-coloured fabric cover. One big advantage of these exhibition boards is they are versatile. You can mix and match them with optional accessories such as a counter with a tablecloth matching your fabric graphics, and halogen lights. You can also modify the display board to fit the available space. For example, if the board is too high, you can lower the height by removing the canopy structure. If your allotted space is too narrow, you can reduce the width of the display by removing one or both side panels. This allows you to be more creative with your available space at the expo hall.

Cost-Effective and Reusable

One advantage our modular display systems will give you is they are practical and cost-effective. They don’t require a lot of time or effort to install. Assembling each display board only takes around 30 minutes. Moreover, the assembly involves mostly just locking and screwing the pieces of the frame together and sliding the fabric graphics in place. You won’t have to spend much on manpower just setting up your exhibition booths. Most of all, you can reuse these display systems for whatever expos or trade shows you organise in the future. You don’t have to spend any more on other expo displays. If you need new images, you simply order new fabric graphic panels for the frames. Our modular display systems are, without a doubt, some of the best exhibition ideas in the market today. Call us right now for more information on these systems.


  • Setup Time: 30 Minutes
  • Graphic Material: Fabric
  • Can be single-sided or double-sided
  • Dimensions: 2900mm/W x 2320mm/H

Request a QUOTE

PO BOX 57 Crows Nest NSW 2065

1300 886 221 (02) 9432 7840

(02) 9037 0353

[email protected]

We appreciate your interest in SK Displays. You can complete the inquiry form
below to request more information or you can simply send us an e-mail to
[email protected]or call us directly at 02 9432 7840 to ask for assistance.

*Required Fields


Enter the verification code shown in the image.
Refresh the image


Fabric print bulk discounts 980x260






Setup Instructions

exhibition stand rental1

Place the feet in the assembly area approximately six feet apart and slide the vertical pole sections onto the foot as shown.

exhibition stand contractor2

Assemble top and bottom horizontal profiles. Slide two sections together as shown. Using the torx key, rotate clockwise 1/4 turn to lock in place and tighten the torx screw on the bottom of the profile.

conference stands3

With torx locks facing the back of display, slide the fabric into the curved side of the top and bottom profile.

shop display4

Attach the horizontal profiles to the vertical poles using the torx key. Bottom profile should be flush with the bottom of the vertical poles. To eliminate the need of a ladder, temporarily attach the top profile at eye level as shown in step 5.

outdoor advertising5

Open the yellow sandwichboards and place them parallel to vertical poles.

exhibitions and trade fairs6

Tilt the display down so the vertical poles rest on the yellow sandwich boards.

exhibition center7

Release the top profile and attach flush with the top of the vertical poles using the torx key. Beginning at one end, tuck the side of the fabric into the center slot of the vertical poles.

banner bug8

If used, attach the end cap profiles as shown using the torx key.

banner template9

Slide the end cap fabric into the top and bottom profile as shown. Beginning at one end, tuck the side of the fabric into the center slot of the vertical pole. If you are using Plexigas end caps, see instructions supplied separately.

fascia board10

All sections are pre connected, just push together until parts click.

shell scheme booth11

Life the roof assembly and slide the poles evenly and smoothly into the vertical poles. The fabric zipper should be facing down toward the back of the unit.

custom banners australia12

If used, you may now attach lights. Slide the “T” section into the slot. Tighten with the round thumb nut.

trade shows13

While standing in front of the unit, SLOWLY lift with the unit to the vertical position.

retail display stands14

Confirm all the fabric edges are pushed neatly and evenly into the horizontal and vertical profiles.

pull up banner15


exhibition stands for hire16
point of sale displays17



Coming Soon

Frequently Asked Questions

Coming Soon