Professional Modular Exhibition Stand at Less the Cost

Option 6 – 2900mm/W x 2320mm/H

Model Number: SK-MDS-2900C1L1R
Width2900mm
Height2320mm

Price Includes:

  • 1 set aluminium frame with hardware
  • 1 set fabric graphic
  • 1 set canopy structure with gray fabric cover
  • 1 hard shipping case with wheels

Optional:

  • 1 set plexiglass header graphic
  • 2 halogen lights

If you need to organise an expo or trade show on a fairly limited budget, you need to find modular exhibition stand that are smart to look at, durable, and don’t come with a big price tag. Our portable display boards are the practical and affordable solution you are looking for.

Visually Appealing

The modular exhibition stands we have available have a strong visual appeal. They make great showcases even for high-profile trade shows and food and wine expos held at five-star hotels and convention centres. They also look nice on photographs and brochures. This particular satellite modular display we have here consists of a frame, a canopy and three pieces of fabric graphics. Both the frame and the canopy of this 2900mm x 2320mm exhibition stand are made with aluminium. The three fabric graphics are the main display panel and the two side panels. These fabric graphic panels are produced using dye sublimation printing, which creates sharp and vividly coloured images. The canopy has a gray fabric cover that zips closed. Optional accessories include halogen lights, a plexiglass fascia, a tablecloth matching the fabric graphics, and a counter. These accessories will greatly boost the visual impact of your modular exhibition stand.

A Practical Investment

A big benefit you will get from using our modular display systems is they are practical. They are easy to set up, can be modified and are reusable. Most of all, they will save you a lot of money. It only takes 30 minutes to set up this display board. The pieces of the frame and the canopy lock securely together. The fabric graphics slide through without a fuss. Screws and other hardware are provided to keep all these pieces in place. You can easily change the look of these display boards if necessary. For instance, if you need to lower the height of the display board, you can remove the canopy. If you need to reduce its width so it can be accommodated in a smaller exhibition space, you only have to remove one or both of the side panels. Most importantly, you can use the frames of these exhibition boards over and over. Thus, you won’t have to buy a new set the next time you organise an event. You only need to order new fabric graphics to replace the panels. These modular exhibition stands will give your convention booths a professional look without eating up your budget. Call us today for more information on our portable display boards.

Details:

  • Setup Time: 30 Minutes
  • Graphic Material: Fabric
  • Can be single-sided or double-sided
  • Dimensions: 2900mm/W x 2320mm/H

Setup Instructions

1

Place the feet in the assembly area approximately six feet apart and slide the vertical pole sections onto the foot as shown.

2

Assemble top and bottom horizontal profiles. Slide two sections together as shown. Using the torx key, rotate clockwise 1/4 turn to lock in place and tighten the torx screw on the bottom of the profile.

3

With torx locks facing the back of display, slide the fabric into the curved side of the top and bottom profile.

4

Attach the horizontal profiles to the vertical poles using the torx key. Bottom profile should be flush with the bottom of the vertical poles. To eliminate the need of a ladder, temporarily attach the top profile at eye level as shown in step 5.

5

Open the yellow sandwichboards and place them parallel to vertical poles.

6

Tilt the display down so the vertical poles rest on the yellow sandwich boards.

7

Release the top profile and attach flush with the top of the vertical poles using the torx key. Beginning at one end, tuck the side of the fabric into the center slot of the vertical poles.

8

If used, attach the end cap profiles as shown using the torx key.

9

Slide the end cap fabric into the top and bottom profile as shown. Beginning at one end, tuck the side of the fabric into the center slot of the vertical pole. If you are using Plexigas end caps, see instructions supplied separately.

10

All sections are pre connected, just push together until parts click.

11

Life the roof assembly and slide the poles evenly and smoothly into the vertical poles. The fabric zipper should be facing down toward the back of the unit.

12

If used, you may now attach lights. Slide the “T” section into the slot. Tighten with the round thumb nut.

13

While standing in front of the unit, SLOWLY lift with the unit to the vertical position.

14

Confirm all the fabric edges are pushed neatly and evenly into the horizontal and vertical profiles.

15

Enjoy.

16

17

Coming soon

Coming soon

Contact Details

PO BOX 57 Crows Nest NSW 2065

(02) 9037 0353

info@skdisplaysbanners.com.au

We appreciate your interest in SK Displays. You can complete the inquiry form below to request more information or you can simply send us an e-mail to info@skdisplaysbanners.com.au or call us directly at (02) 9432 7840 to ask for assistance.

Request a QUOTE

* required fields

Subscribe