Expo Display Boards for Smart, Sophisticated Displays

SK -MDS-1500

Model no SK -MDS-1500
Width 1500mm
Height 2150mm

Price Includes:

  • 1 set aluminium frame with hardware
  • 1 set fabric graphic
  • 1 hard shipping case with wheels

Optional:

  • 1 set canopy structure with gray fabric cover
  • 1 set plexiglass header graphic
  • 2 halogen lights

Option 1 – 1500mm/W x 2150mm/H

When you’re organising an expo or trade show that will be attended by thousands of people and covered extensively by the media, one of the details you have to take care of are the exhibition booths the participants will use. The participants will want to showcase their products and services to their best advantage, and you’ll have to help them achieve that by allowing them to be creative in their use of expo display boards. Our expo display systems give you a wide set of options to go for.

Unique and Outstanding Displays

Our expo display boards are ideal accessories for exhibition booths, especially if you’re setting them up at popular expos and trade shows at high-profile venues such as hotels and large convention centres. These 1500mm x 2150mm modular display systems are stylish and will give your expo an overall professional look. Each of the satellite modular display we offer is made up of a frame and a fabric graphic. The frame is made of aluminium and has heavy-duty cross bars that lock in place. The fabric graphic is created using the latest dye sublimation graphics printing technology that results in rich and vivid colours. You can further enhance the look of the displays at the venue with the use of halogen lights, counters and tablecloths per booth. We have these items available as add-ons.

Practical and Easy to Setup

This brandstand satellite display is easy to set up. The setup time for this particular display type takes around 30 minutes to complete. The different pieces of this display board lock in place and are secured with screws. The best advantage you will get from this modular display system is it will save you money in the long run. You can use these displays over and over, and for different events as well. If you require different graphics for the displays, you only need to order a new set of fabric graphics and use the same frame. The system also allows you to be more creative as you can mix and match different types of modular displays and accessorise accordingly. Our 1500mm x 2150mm fabric display boards are truly the best cost-effective solution you’ll find for your expo needs. We deliver to Sydney, Melbourne, Darwin, Brisbane, Perth, Canberra, Adelaide, Gold Coast, or any location in Australia. Call us for more information today.

Details:

  • Setup Time: 30 Minutes
  • Graphic Material: Fabric
  • Can be single-sided or double-sided
  • Dimensions: 1500mm/W x 2150mm/H

 

Request a QUOTE

PO BOX 57 Crows Nest NSW 2065

1300 886 221 (02) 9432 7840

(02) 9037 0353

[email protected]

We appreciate your interest in SK Displays. You can complete the inquiry form
below to request more information or you can simply send us an e-mail to
[email protected]or call us directly at 02 9432 7840 to ask for assistance.


*Required Fields

 Subscribe

Enter the verification code shown in the image.
captcha
Refresh the image

cheap-trade-show-display-980x260

Fabric print bulk discounts 980x260

 

 

 

 

 

Setup Instructions

exhibition stand rental1

Place the feet in the assembly area approximately six feet apart and slide the vertical pole sections onto the foot as shown.

exhibition stand contractor2

Assemble top and bottom horizontal profiles. Slide two sections together as shown. Using the torx key, rotate clockwise 1/4 turn to lock in place and tighten the torx screw on the bottom of the profile.

conference stands3

With torx locks facing the back of display, slide the fabric into the curved side of the top and bottom profile.

shop display4

Attach the horizontal profiles to the vertical poles using the torx key. Bottom profile should be flush with the bottom of the vertical poles. To eliminate the need of a ladder, temporarily attach the top profile at eye level as shown in step 5.

outdoor advertising5

Open the yellow sandwichboards and place them parallel to vertical poles.

exhibitions and trade fairs6

Tilt the display down so the vertical poles rest on the yellow sandwich boards.

exhibition center7

Release the top profile and attach flush with the top of the vertical poles using the torx key. Beginning at one end, tuck the side of the fabric into the center slot of the vertical poles.

banner bug8

If used, attach the end cap profiles as shown using the torx key.

banner template9

Slide the end cap fabric into the top and bottom profile as shown. Beginning at one end, tuck the side of the fabric into the center slot of the vertical pole. If you are using Plexigas end caps, see instructions supplied separately.

fascia board10

All sections are pre connected, just push together until parts click.

shell scheme booth11

Life the roof assembly and slide the poles evenly and smoothly into the vertical poles. The fabric zipper should be facing down toward the back of the unit.

custom banners australia12

If used, you may now attach lights. Slide the “T” section into the slot. Tighten with the round thumb nut.

trade shows13

While standing in front of the unit, SLOWLY lift with the unit to the vertical position.

retail display stands14

Confirm all the fabric edges are pushed neatly and evenly into the horizontal and vertical profiles.

pull up banner15

Enjoy.

exhibition stands for hire16
point of sale displays17

 

Templates

Coming Soon

Frequently Asked Questions

Coming Soon